Netgear GSM4248P User Manual - Page 360

AV Line of Fully Managed Switches M4250 Series Main User Manual 14. From the Autonomous Flag menu, to enable or disable the prefix from being used for on-link determination. If enabled, the prefix can be used for autonomous address configuration. 15. Do one of the following: • If you are adding a new prefix, click the Add button. Your settings are saved. The prefix is added for the interface. • If you are changing an existing prefix, click the Apply button. Your settings are saved. The Current State field displays the state of the IPV6 address. The state is TENT (tentative) if routing is disabled or DAD (Duplicate Address Detection) fails. The state is Active if the interface is active and DAD is successful. 16. To save the settings to the running configuration, click the Save icon. Delete a prefix setting from an IPv6 routing interface You can delete a prefix and associated settings that you no longer need for an IPv6 routing interface. To a delete prefix settings from an IPv6 routing interface: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. Click the Main UI Login button. The main UI login page displays in a new tab. 4. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 5. Select Routing> IPv6 > Advanced > Prefix Configuration. The Prefix Configuration page displays. 6. From the Interface menu, select the interface. 7. Select the check box for the prefix. 8. Click the Delete button. Your settings are saved. The prefix is removed. Manage Routing 360 Main User Manual