Netgear GSM4248P User Manual - Page 332

AV Line of Fully Managed Switches M4250 Series Main User Manual Table 90. MSRP streams information (Continued) Field Description Received Failure Information Failure Code If a failure occurred, the number that represents the reason for the failure. The switch supports the following codes: • 1: Insufficient bandwidth • 3: Insufficient bandwidth for the traffic class • 5: Stream destination address is already in use • 7: Reported latency changed • 8: Egress port is not capable of audio video bridging (AVB) • 9: Use a different destination address (for example, if the MAC DA hash table is full) • 12: Cannot store destination address (for example, if the device ran out of MAC DA resources) • 13: Requested priority is not an SR class priority • 14: MaxFrameSize is too large for media • 15: msrpMaxFanInPorts limit was reached • 16: Changes in FirstValue for a registered StreamID • 17: VLAN is blocked on this egress port (Registration Forbidden) Received Failure Information If a failure occurred, the MAC address of the device on which the failure Bridge MAC occurred. Talker Interface The interface on which the talker is present. Listeners The interface on which listeners are present. Loop protection Loop protection can detect physical and logical loops between Ethernet ports on a device. About loop protection Loops inside a network are costly because they consume resources and reduce the performance of the network. Detecting loops manually can be cumbersome. Configure Switching Information 332 Main User Manual