Netgear GSM4248P User Manual - Page 390

AV Line of Fully Managed Switches M4250 Series Main User Manual Note: 1 in the mask indicates a do not care in the corresponding address bit. When an access list rule includes a destination IP address and netmask (an extended access list), the destination IP address is compared to the network mask of the destination of the route. The destination netmask in the access list serves as a wildcard mask, indicating which bits in the route's destination mask are significant for the filtering operation. 10. Click the Apply button. Your settings are saved. 11. To save the settings to the running configuration, click the Save icon. The following table describes the nonconfigurable fields on the page. Table 107. RIP route redistribution summary information Field Source Protocol Description The type of source route to be redistributed by RIP: • Connected • Static Redistribute Mode Metric Distribute List Match Internal Match External Type 1 Match External Type 2 Match NSSA External Type 1 Match NSSA External Type 2 Indicates if the route for a source protocol is redistributed. By default, route distribution is disabled. The metric of redistributed routes for the source route. The field displays 0 if the metric is not configured. The access list that filters the routes to be redistributed by the destination protocol. The field displays 0 if no ACL is configured for this purpose. Indicates if an internal OSPF route is redistributed. Indicates if an external type 1 OSPF route is redistributed. Indicates if an external type 2 OSPF route is redistributed. Indicates if an NSSA type 1 OSPF route is redistributed. Indicates if an NSSA type 2 OSPF route is redistributed. Router discovery and router advertisements By default, a routing interface does not send router advertisements.You can enable the router advertisements for a routing interface and configure the setting for the router advertisements. Manage Routing 390 Main User Manual