Netgear GSM7212F GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 244

ProSafe Managed Switch clear ip route all This command removes all the route entries learned over the network. Format Mode Protocol Total Number of Routes clear ip route all Privileged EXEC Tells which protocol added the specified route. The possibilities are: local, static, OSPF, or RIP. The total number of routes. show ip brief This command displays all the summary information of the IP, including the ICMP rate limit configuration and the global ICMP Redirect configuration. Format Modes show ip brief • Privileged EXEC • User EXEC Term Definition Default Time to Live The computed TTL (Time to Live) of forwarding a packet from the local router to the final destination. Routing Mode Shows whether the routing mode is enabled or disabled. Maximum Next Hops The maximum number of next hops the packet can travel. Maximum Routes The maximum number of routes the packet can travel. ICMP Rate Limit Interval Shows how often the token bucket is initialized with burst-size tokens. Burst-interval is from 0 to 2147483647 milliseconds. The default burst-interval is 1000 msec. ICMP Rate Limit Burst Size Shows the number of ICMPv4 error messages that can be sent during one burst-interval. The range is from 1 to 200 messages. The default value is 100 messages. ICMP Echo Replies Shows whether ICMP Echo Replies are enabled or disabled. ICMP Redirects Shows whether ICMP Redirects are enabled or disabled. The following shows example CLI display output for the command. (Switch) #show ip brief Default Time to Live 64 Routing Mode Disabled Maximum Next Hops 4 Maximum Routes 6000 Routing Commands 244