Netgear GSM7212F GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 525

ProSafe Managed Switch Term No of Email Sent Time Since Last Email Sent Definition The number of email messages that were sent from the switch since the counter was cleared. The amount of time that has passed since the last email was sent from the switch. clear logging email statistics This command resets the email alerting statistics. Format Mode clear logging email statistics Privileged EXEC mail-server Use this command to configure the SMTP server to which the switch sends email alert messages and change the mode to Mail Server Configuration mode. The server address can be in the IPv4, IPv6, or DNS name format. Format Mode mail-server {ip-address | ipv6-address | hostname} Global Config no mail-server Use this command to remove the specified SMTP server from the configuration. Format Mode no mail-server {ip-address | ipv6-address | hostname} Global Config Security Use this command to set the email alerting security protocol by enabling the switch to use TLS authentication with the SMTP Server. If the TLS mode is enabled on the switch but the SMTP sever does not support TLS mode, no email is sent to the SMTP server. Default Format Mode none security {tlsv1 | none} Mail Server Config Utility Commands 525