Netgear GSM7212F GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 472

ProSafe Managed Switch the ACL rule is applied when the time-range withspecified name becomes active. The ACL rule is removed when the time-range withspecified name becomes inactive. Ethertype Keyword appletalk arp ibmsna ipv4 ipv6 ipx mplsmcast mplsucast netbios novell pppoe rarp Corresponding Value 0x809B 0x0806 0x80D5 0x0800 0x86DD 0x8037 0x8848 0x8847 0x8191 0x8137, 0x8138 0x8863, 0x8864 0x8035 The vlan and cos parameters refer to the VLAN identifier and 802.1p user priority fields, respectively, of the VLAN tag. For packets containing a double VLAN tag, this is the first (or outer) tag. The assign-queue parameter allows specification of a particular hardware queue for handling traffic that matches this rule. The allowed value is 0-(n-1), where n is the number of user configurable queues available for the hardware platform. The assign-queue parameter is valid only for a permit rule. Note: The special command form {deny | permit} any any is used to match all Ethernet layer 2 packets, and is the equivalent of the IP access list "match every" rule. Format Mode {deny|permit} { | any} { | any} [ | ] [vlan {eq }] [cos ] [[log] [time-range ][assign-queue ]] [{mirror | redirect} ] Mac-Access-List Config Quality of Service (QoS) Commands 472