Netgear GSM7212F GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 274

ProSafe Managed Switch area stub no-summary (OSPF) This command configures the Summary LSA mode for the stub area identified by . Use this command to prevent LSA Summaries from being sent. Default Format Mode disabled area stub no-summary Router OSPF Config no area stub no-summary This command configures the default Summary LSA mode for the stub area identified by . Format Mode no area stub no-summary Router OSPF Config area virtual-link (OSPF) This command creates the OSPF virtual interface for the specified and . The parameter is the Router ID of the neighbor. Format Mode area virtual-link Router OSPF Config no area virtual-link This command deletes the OSPF virtual interface from the given interface, identified by and . The parameter is the Router ID of the neighbor. Format Mode no area virtual-link Router OSPF Config area virtual-link authentication This command configures the authentication type and key for the OSPF virtual interface identified by and . The parameter is the Router ID of the neighbor. The value for is either none, simple, or encrypt. The [key] is composed of standard displayable, non-control keystrokes from a Standard 101/102-key keyboard. The authentication key must be 8 bytes or less if the authentication type is simple. If the type is encrypt, the key may be up to 16 bytes. Unauthenticated interfaces do not need an authentication key. If the type is encrypt, a key id in the range of 0 and 255 must be Routing Commands 274