Netgear GSM7212F GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 304

ProSafe Managed Switch Term Definition Area ID A 32-bit identifier for the created stub area. Type of Service The type of service associated with the stub metric. Switch CLI only supports Normal TOS. Metric Val The metric value is applied based on the TOS. It defaults to the least metric of the type of service among the interfaces to other areas. The OSPF cost for a route is a function of the metric value. Import Summary LSA Controls the import of summary LSAs into stub areas. show ip ospf virtual-link This command displays the OSPF Virtual Interface information for a specific area and neighbor. The parameter identifies the area and the parameter identifies the neighbor's Router ID. Format Modes show ip ospf virtual-link • Privileged EXEC • User EXEC Term Definition Area ID The area id of the requested OSPF area. Neighbor Router ID The input neighbor Router ID. Hello Interval The configured hello interval for the OSPF virtual interface. Dead Interval The configured dead interval for the OSPF virtual interface. Iftransit Delay Interval The configured transit delay for the OSPF virtual interface. Retransmit Interval The configured retransmit interval for the OSPF virtual interface. Authentication The configured authentication type of the OSPF virtual interface. Type State The OSPF Interface States are: down, loopback, waiting, point-to-point, designated router, and backup designated router. This is the state of the OSPF interface. Neighbor State The neighbor state. Routing Commands 304