Netgear HDX101 HDX101 User Manual - Page 29
Factory Reset, used to select devices for this type of operation.
UPC - 606449046854
View all Netgear HDX101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
HDX101 Powerline HD Ethernet Adapter User Guide To reset all the devices in your network to the factory defaults, proceed as follows: 1. For each remote device in your network, click the device name to highlight it. Note: Because only one device in a system can be reset at a time, the checkboxes are not used to select devices for this type of operation. Select remote devices first Select device by highlighting the device name, not by setting a checkmark Figure 2-19 a. Click the Factory Reset button. The software will display a message similar to the following: Figure 2-20 Installing the Powerline HD Ethernet Adapter v1.2, February 2007 2-15
HDX101 Powerline HD Ethernet Adapter User Guide
Installing the Powerline HD Ethernet Adapter
2-15
v1.2, February 2007
To reset all the devices in your network to the factory defaults, proceed as follows:
1.
For each remote device in your network, click the device name to highlight it.
a.
Click the
Factory Reset
button. The software will display a message similar to the
following:
Note:
Because only one device in a system can be reset at a time, the checkboxes are
not
used to select devices for this type of operation.
Figure 2-19
Figure 2-20
Select remote
devices first
Select device by
highlighting the
device name, not
by setting a
checkmark