Netgear LG2200D User Manual - Page 133
Factory Settings, Restore Factory Settings
View all Netgear LG2200D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
U.S. Cellular® 4G LTE™ Router (LG2200D) Factory Settings You can return the router to its factory settings. Use the end of a paper clip or a similar object to press and hold the Restore Factory Settings button on the bottom of the router for at least seven seconds. The router resets, and returns to the factory configuration settings shown in the following table. Table 3. Factory default settings Feature Router login Internet connection Local network (LAN) Firewall Mobile broadband Default behavior User login URL www.routerlogin.com User name (case-sensitive) admin Login password (case-sensitive) password WAN MAC address Use default hardware address WAN MTU size 1500 Port speed AutoSensing LAN IP 192.168.0.1 Subnet mask 255.255.255.0 DHCP server Enabled DHCP range 192.168.0.2 to 192.168.0.254 DHCP starting IP address 192.168.0.2 DHCP ending IP address 192.168.0.254 DMZ Disabled Time zone Pacific Time for North America Daylight saving time adjustment Disabled Inbound (communications coming Disabled (except traffic on port 80, the HTTP port) in from the Internet) Outbound (communications going Enabled (all) out to the Internet) Source MAC filtering Internet service provider Disabled U.S. Cellular® APN usccinternet Access Number *99# PDP type IPV4V6 User name None Supplemental Information 133