Netgear LM1200 User Manual - Page 25
Settings > Advanced > LAN, IP address, Submit, Netmask
View all Netgear LM1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
NETGEAR 4G LTE Modem 5. Select Settings > Advanced > LAN. Note: The diagnostics feature on the LAN page is intended for NETGEAR technical support only. By default, the Enable Diagnostics Off radio button is selected. 6. In the IP address field, enter a new IP address. The default IP address is 192.168.5.1. The Submit button displays after you change the IP address. 7. In the Netmask field, enter a new network mask. The default network mask is 255.255.255.0. 8. Click the Submit button. Your settings are saved and the modem restarts. A device that is connected to the modem is disconnected when the modem restarts. You can reconnect the device to the modem using the new IP address of the modem. Manage the Modem LAN 25 Settings User Manual
5.
Select
Settings > Advanced > LAN
.
Note:
The diagnostics feature on the LAN page is intended for NETGEAR technical
support only. By default, the Enable Diagnostics
Off
radio button is selected.
6.
In the
IP address
field, enter a new IP address.
The default IP address is 192.168.5.1.
The
Submit
button displays after you change the IP address.
7.
In the
Netmask
field, enter a new network mask.
The default network mask is 255.255.255.0.
8.
Click the
Submit
button.
Your settings are saved and the modem restarts. A device that is connected to the
modem is disconnected when the modem restarts. You can reconnect the device
to the modem using the new IP address of the modem.
User Manual
25
Manage the Modem LAN
Settings
NETGEAR 4G LTE Modem