Netgear LM1200 User Manual - Page 27
Bridge, IP Address, Netmask LTE, Router, Submit
View all Netgear LM1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
NETGEAR 4G LTE Modem 6. Do one of the following: • To enable Bridge mode, select the Bridge radio button. As an option, enter a different IP address in the IP Address field and an LTE network mask in the Netmask (LTE) field. When the modem functions in Bridge mode, the default LTE network mask setting (255.255.255.0) works with most routers. If the modem and router do not operate together, adjust LTE network mask. • To enable Router mode, select the Router radio button. By default, the Router radio button is selected. 7. Click the Submit button. Your settings are saved and the modem restarts. Any devices that are connected to the modem are disconnected when the modem restarts. Enabling Bridge mode automatically disables the modem's DHCP server. You can connect only a single device to the modem. Enabling Router mode automatically enables the modem's DHCP server, which assigns a LAN IP address to each connected device. Manage the Modem LAN 27 Settings User Manual