Netgear LM1200 User Manual - Page 93
Troubleshoot With the LEDs, Power LED Is Off
View all Netgear LM1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
NETGEAR 4G LTE Modem Troubleshoot With the LEDs The following table describes error conditions that are indicated by the LEDs. Table 8. LED descriptions (error conditions) Designation Icon or LED Power Ethernet LAN Description Solid amber. The modem is starting up. Solid green. The modem is receiving power and is connected to the mobile broadband network and the Internet. Blinking amber. Device error. For more information, see Troubleshoot With the LEDs on page 93. Off. The modem is not receiving power. Solid amber. A device is connecting to the port. Green. A device is connected to this port. Ethernet WAN Solid amber. A device is connected to this port. Solid green. Full data connectivity. Signal Strength Green. The LTE connection is good. Blinking indicates data traffic. Amber. The LTE connection is good, but the signal is weaker. Blinking indicates data traffic. Red. The modem can't connect to the LTE network. Power LED Is Off If the Power LED do the following: is off and other LEDs are also off when you turn on the modem, • Check that the power On/Off button on the back is in the On position, that is, it is pressed in. • Check that the power cord is correctly connected to your modem and that the power supply adapter is correctly connected to a functioning power outlet. • Check that you are using the DC 5V, 2A power adapter that NETGEAR supplied for this product. If the error persists, most likely a hardware problem occurred. For recovery instructions or help with a hardware problem, contact technical support at netgear.com/support. Alerts and Troubleshooting 93 User Manual