Netgear MA701 MA701 Reference Manual - Page 31
Remove and reinsert the MA701 Wireless CF Card or, Under the Connections Settings in Windows, make
View all Netgear MA701 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
User Guide for the NETGEAR 802.11b Wireless Compact Flash Card MA701 The PDA does not get an IP Address. The IP Address has not taken effect yet. Remove and reinsert the MA701 Wireless CF Card or turn off and then turn on the PDA. Mismatched network settings, such as SSID and WEP encryption. Check and re-enter the same SSID and WEP settings as Access Point. The PDA does not recognize the MA701. The MA701 Software may not be installed properly. Remove and then reinstall the MA701 Wireless CF Card's Driver/Utility software. The PDA may need to be reset. Reset the PDA. The battery power Recharge the battery. may be too low. The MA701 cannot connect to a known Access Point within range. The SSID may be Check and enter the correct SSID. incorrect. Mismatched WEP Check and make sure you have configured the same settings. WEP settings as the Access Point Incorrect Network Check to see if the MA701 Wireless CF Card is Mode. configured in Infrastructure mode. The PDA cannot browse the web even when the MA701 is associated with an Access Point correctly. Incorrect setting on PDA. The IP address may not be correct. Under the Connections Settings in Windows, make sure that you have selected the Internet option for the "My network card connects to:" field. Change to a known valid IP address or reset the PDA. Basic Setup for a PDA M-10204-1 3-11