Netgear MBM621 MBM621 Reference Manual - Page 22
Attached Devices, Table 2-2., Modem Status Screen, continued
UPC - 606449056945
View all Netgear MBM621 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Mobile Broadband Modem MBM621 User Manual Table 2-2. Modem Status Screen (continued) Settings and Statistics Description WAN Port Connection Status The status of the Internet connection. IP Address The IP address of your modem, as seen from the Internet. If the modem is not connected to the Internet, this will be blank or 0.0.0.0 WAN Protocol The current connection protocol being used. IP Subnet Mask The subnet mask associated with the Internet IP address Domain Name Server. Gateway IP Address This must be a router on the same LAN segment as your modem. Domain Name Server (DNS) The DNS server IP addresses used by the modem. These addresses are usually obtained dynamically from the ISP. Connection Status and Refresh buttons LAN Port MAC Address The MAC address of the modem as seen from the LAN. IP Address The LAN IP address of the modem. DHCP Indicates if the modem is acting as a DHCP server for devices on your LAN. IP Subnet Mask The subnet mask associated with the Show Statistics button Attached Devices View a list of devices attached to the Mobile Broadband Modem. Figure 2-3 For each device, the table shows the IP address, device name if available, and the Ethernet MAC address. Note that if the modem is rebooted, the table data is lost until the modem rediscovers the devices. To force the modem to look for attached devices, click Refresh. 2-4 Settings and Maintenance v1.0, September 2007