Netgear RP614 RP614v4 Reference Manual - Page 14
The Router’s Front Panel, Table 1-1. Status Light Descriptions - 4 port cable dsl router
UPC - 606449023022
View all Netgear RP614 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
RP614v4 Cable/DSL Router Reference Manual The Router's Front Panel The front panel of the RP614v4 router contains the status lights described below. 2 4 1 3 Figure 1-1 You can use the status lights to verify connections. Viewed from left to right, the table below describes the lights on the front panel of the router. Table 1-1. Status Light Descriptions LED Activity 1. Power 2. Test On Green Solid Off On Off 3. Internet On-Amber 4. LAN On-Green Blink-Green On-Green Blink-Green On-Amber Blink-Amber Off Description Power is supplied to the router. Power is not supplied to the router. The router is initializing or in the middle of a firmware upgrade. The router is ready and running. The Ethernet cable is connected but the router has not acquired an Internet address. The router has an Internet address. Data is being transmitted or received by the Internet port. The LAN (local area network) port is connected to a 100 Mbps device. Data is being transmitted or received at 100 Mbps. The Local port has detected link with a 10 Mbps device. Data is being transmitted or received at 10 Mbps. No link is detected on this port. 1-2 Introduction v3.1, June 2008