Netgear RP614 RP614v4 Reference Manual - Page 28
Table 3-1., Router Status Fields, This screen shows the following parameters - default ip
UPC - 606449023022
View all Netgear RP614 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
RP614v4 Cable/DSL Router Reference Manual This screen shows the following parameters: Table 3-1. Router Status Fields Field Description Account Name This field displays the Host Name assigned to the router. Firmware Version This field displays the router firmware version. Internet Port These parameters apply to the Internet (Wire Area Network also referred to as WAN) port of the router. MAC Address This field displays the Media Access Control address being used by the Internet (WAN) port of the router. IP Address This field displays the IP address being used by the Internet (WAN) port of the router. If no address is shown, the router cannot connect to the Internet. DHCP If set to FixedIP, the router is configured to use a fixed IP address on the WAN. If set to Client, the router is configured to obtain an IP address dynamically from the ISP. IP Subnet Mask This field displays the IP Subnet Mask being used by the Internet (WAN) port of the router. Domain Name Server (DNS) This field displays the IPaddress(es) of the DNS server(s). LAN Port These parameters apply to the Local (LAN) port of the router. MAC Address This field displays the Media Access Control address being used by the LAN port of the router. IP Address This field displays the IP address being used by the Local (LAN) port of the router. The default is 192.168.1.1 DHCP Identifies if the router's built-in DHCP server is active for the LAN attached devices. IP Subnet Mask This field displays the IP Subnet Mask being used by the Local (LAN) port of the router. The default is 255.255.255.0 3-2 Maintenance v3.1, June 2008