Netgear RP614 RP614v4 Reference Manual - Page 40
Configuring for Port Forwarding to Local Servers, Internet Networking
![]() |
UPC - 606449023022
View all Netgear RP614 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
RP614v4 Cable/DSL Router Reference Manual Configuring for Port Forwarding to Local Servers Although the router causes your entire local network to appear as a single machine to the Internet, you can make a local server (for example, a Web server or game server) visible and available to the Internet. This is done using the Port Forwarding menu. From the Main Menu of the browser interface, under Advanced, click on Port Forwarding to view the port forwarding menu, shown below. Figure 4-3 Note: If you are unfamiliar with networking and routing, refer to "Internet Networking and TCP/IP Addressing" in Appendix B, to become more familiar with the terms and procedures used in this manual. . Use the Port Forwarding menu to configure the router to forward incoming protocols to computers on your local network. In addition to servers for specific applications, you can also specify a Default DMZ Server to which all other incoming protocols are forwarded. The DMZ Server is configured in the Security Menu. Before starting, you need to determine which type of service, application or game you will provide and the IP address of the computer that will provide each service. Be sure the computer's IP address never changes. To configure port forwarding to a local server: 4-4 Advanced Configuration of the Router v3.1, June 2008
![](/manual_guide/products/netgear-rp614-rp614v4-reference-manual-cebae62/40.png)