Netgear SW510 Installation Guide - Page 17

Installation Guide for the Model SW510 and Model SW518 Ethernet Switches Rear Panel As illustrated in Figure 2-4 and Figure 2-5, the rear panel has full-duplex (FDX), half-duplex (HDX), and auto-duplex (AUTO) toggle switches, a standard AC power receptacle, and fans for cooling. WARNING - AUTO FDX, HDX - Whenever a port changes between FDX and HDX mode, entire unit resets and traffic in all ports will be stopped temporarily Enable port to determine duplex mode automatically Force port to operate at Full Duplex and Half Duplex mode respectively 10 Mbps 1 8 10/100 Mbps 9 10 FDX FDX HDX AUTO 3 4 1 2 595EA Key: 1 = FDX and HDX toggle switches to set 10 Mbps ports 1 through 8 for full- or half-duplex mode 2 = FDX and AUTO toggle switches to set 10/100 Mbps ports 9 and 10 for full- or auto-duplex mode 3 = Fans 4 = AC power outlet Figure 2-4. Rear panel of the Model SW510 switch WARNING - Whenever a port changes between FDX and HDX mode, entire unit resets and traffic in all ports will be stopped temporarily AUTO - Enable port to determine duplex mode automatically FDX, HDX - Force port to operate at Full Duplex and Half Duplex mode respectively 10 Mbps 10/100 Mbps 1 89 16 1718 FDX FDX HDX AUTO 3 4 1 2 596EA Key: 1 = FDX and HDX toggle switches to set 10 Mbps ports 1 through 16 for full- or half-duplex mode 2 = FDX and AUTO toggle switches to set 10/100 Mbps ports 17 and 18 for full- or auto-duplex mode 3 = Fans 4 = AC power outlet Figure 2-5. Rear panel of the Model SW518 switch Physical Description 2-5