Netgear SW510 Installation Guide - Page 21

Installation Guide for the Model SW510 and Model SW518 Ethernet Switches 2 3 1 4 Link Full Link Full Link Full Link Full 4 7 4 5 6 683EA Key: 1 = Model SW518 Ethernet switch (Normal/Uplink push button to configure port 18 set to Uplink position) 2 = Server with 20 Mbps connection (adapter card installed in server; duplex toggle switch for port 7 on Model SW518 switch set to full-duplex mode) 3 = Model FS508 Fast Ethernet switch serving as network backbone (A Fast Ethernet hub can also be used.) 4 = Model EN516 Ethernet hubs (Normal/Uplink push button set to Uplink position) 5 = Server with 10 Mbps connection 6 = PCs with 10 Mbps connection 7 = PCs with 100 Mbps connection Figure 3-2. Model SW518 switches used for network segmentation and as a multiport bridge to a high-bandwidth backbone Note: Full-duplex operation applies to point-to-point access only when attaching the switch to a workstation, a server, or another switch. When connecting to a repeater or a hub, set the port for half-duplex operation. Applications 3-3