Netgear SW510 Installation Guide - Page 35

Appendix B Connector Pin Assignments This appendix provides information about the RJ-45 plug and the vista RJ-45 connector that are used for the Model SW510 and Model SW518 Ethernet switches. RJ-45 Plug and vista RJ-45 Connector The RJ-45 plug accepts 4-pair unshielded (UTP) or shielded 100 Ω twisted pair cable and connects into the vista RJ-45 connector. The vista RJ-45 connector (also referred to as a 10 Mbps or 10/100 Mbps port) is used to connect stations, hubs, and switches through unshielded twisted pair cable and supports 10 Mbps or 100 Mbps data transmission. The RJ-45 plug and vista RJ-45 connector are both illustrated in Figure 5-1. 12345678 Key: 1 to 8 = Pin numbers 81 711EA Figure 5-1. RJ-45 plug and vista RJ-45 connector Connector Pin Assignments B-1