Netgear WG311v3 WG311v3 Reference Manual - Page 36
Setting up WPA2-PSK Security
View all Netgear WG311v3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
NETGEAR 54 Mbps Wireless PCI Adapter WG311 v3 User Manual Setting up WPA2-PSK Security Follow the steps below to configure WPA2-PSK Security. 1. Run the WG311 v3 Smart Wizard. a. Make sure the WG311 v3 software is installed and the WG311 v3 is properly installed in the PCI slot in your computer. b. Use the icon to open the Smart Wizard. The Settings tab page opens. Figure 2-10 2. Configure the Security settings. a. In the Profile box, select the profile or type in a profile name. b. In the Network Name (SSID) field select the network, or enter the SSID. Note: You will not get a wireless network connection unless the network SSID matches exactly what is configured in the access point. c. In the Security section, select WPA2-PSK [AES]. For more information, see the link to "Wireless Communications:" in Appendix B. 3. Save your settings in a Profile. a. Click the Save Profile button. All the configuration settings are saved in this profile. b. Click Apply, and then click Close to exit the Smart Wizard. 2-14 v3.0, February 2007