Netgear WNDR4300 User Manual - Page 123
Factory Settings, Restore Factory Settings
View all Netgear WNDR4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
N750 Wireless Dual Band Gigabit Router WNDR4300 Factory Settings You can return the router to its factory settings. Use the end of a paper clip or a similar object to press and hold the Restore Factory Settings button on the back of the router for at least 5 seconds. The router resets, and returns to the factory configuration settings shown in the following table. Table 2. Factory default settings Feature Router login Internet connection Local network (LAN) Firewall Default behavior User login URL www.routerlogin.com or www.routerlogin.net User name (case-sensitive) admin Login password (case-sensitive) password WAN MAC address Use default hardware address WAN MTU size 1500 Port speed AutoSensing LAN IP address 192.168.1.1 Subnet mask 255.255.255.0 DHCP server Enabled DHCP range 192.168.1.2 to 192.168.1.254 Time zone Pacific time Time zone daylight savings time Disabled Allow a registrar to configure this Enabled router DHCP starting IP address 192.168.1.2 DHCP ending IP address 192.168.1.254 DMZ Disabled Time zone GMT for WW except NA and GR, GMT+1 for GR, GMT-8 for NA Time zone adjusted for daylight savings time Disabled Inbound (communications coming Disabled (except traffic on port 80, the HTTP port) in from the Internet) Outbound (communications going Enabled (all) out to the Internet) Source MAC filtering Disabled Supplemental Information 123