Netgear WNDR4300 User Manual - Page 93
Set Up a Repeater Unit, Advanced > Advanced Setup > Wireless Repeating Function
View all Netgear WNDR4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
N750 Wireless Dual Band Gigabit Router WNDR4300 2. Select Advanced > Advanced Setup > Wireless Repeating Function to display the Wireless Repeating Function screen. Scroll to view more settings 3. Select the Enable Wireless Repeating Function check box and select the Wireless Base Station radio button. 4. Enter the MAC address for one or more repeater units. 5. Click Apply to save your changes. Set Up a Repeater Unit Use a wired Ethernet connection to set up the repeater unit to avoid conflicts with the wireless connection to the base station. Note: If you are using the WNDR4300 base station with a non-NETGEAR router as the repeater, you might need to change additional configuration settings. In particular, you should disable the DHCP server function on the wireless repeater AP. To configure the router as a repeater unit: 1. Log in to the router that will be the repeater. 2. Select Basic > Wireless Settings and verify that the wireless settings match the base unit exactly. The wireless security option must be set to None or WEP. 3. Select Advanced > Wireless Repeating Function, and select the Enable Wireless Repeating Function check box and the Wireless Repeater radio button. Advanced Settings 93