Netgear WNDR4300 User Manual - Page 89
Wireless AP, Advanced > Advanced Setup > Wireless AP
View all Netgear WNDR4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
N750 Wireless Dual Band Gigabit Router WNDR4300 Wireless AP You can set up the router to run as an access point (AP) on the same local network as another router. To set up the router as an AP: 1. Select Advanced > Advanced Setup > Wireless AP. 2. Select the Enable Access Point Mode check box. 3. Scroll down to view the bottom half of the screen to display more instructions. 4. Use an Ethernet cable to connect the Internet port of this router to a LAN port in the other router. 5. Select the check box for the IP address setting that you want to use: • Get an IP address dynamically from the other router. The other router on the network assigns an IP address to this router while this router is in AP mode. • Fixed IP address (not recommended). Use this setting if you want to manually assign a specific IP address to this router while it is in AP mode. Using this option effectively requires advanced network experience. 6. Click Apply. Advanced Settings 89