Netgear WPN824EXT WPN824EXT User Manual - Page 36
Table 3-1., Wireless Range Extender Status Fields, This screen shows the following settings
UPC - 606449055146
View all Netgear WPN824EXT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
RangeMax WiFi Range Extender WPN824EXT User Manual This screen shows the following settings: Table 3-1. Wireless Range Extender Status Fields Field Firmware Version Hardware Version IP Settings MAC Address IP Address IP Subnet Mask Default Gateway Domain Name Server DHCP Client Wireless Settings Wireless Network Name (SSID) Country/Region Channel Operation Mode Security Options Description This is the version of the current software the extender is using. This will change if you upgrade your extender. This is the version of the physical device. These are the current settings that you configured in the Basic Settings screen. The Media Access Control address, the physical address, being used by the Internet (WAN) port of the extender. The IP address being used by the Internet port of the extender. The default IP address of the extender is 192.168.1.250. If no address is shown, or is 0.0.0.0, the extender cannot connect to the Internet. The IP subnet mask being used by the Internet (WAN) port of the extender. For an explanation of subnet masks and subnet addressing, click the link to the online document "TCP/IP Networking Basics" in Appendix B. The assigned default gateway address (the local network address) that the extender is connected to. If it is assigned dynamically, and no Internet connection exists, this is blank or 0.0.0.0. The Domain Name Server addresses being used by the extender. A Domain Name Server translates human language URLs, such as http:// www.netgear.com, into IP addresses. If disabled, the extender is configured to use a fixed IP address. If enabled, the extender is configured to obtain an IP address dynamically. These are the current settings that you configured in the Wireless Settings screen. The wireless network name (SSID) being used by the wireless port of the extender. The default is NETGEAR_EXT. The geographic region where the extender being used. It might be illegal to use the wireless features of the extender in some parts of the world. Identifies the channel of the wireless port being used. Click the link to the online document "Wireless Networking Basics" in Appendix B for the frequencies used on each channel. Indicates the extender communication mode: 802.11g and 802.11b, 802.11g only, 802.11b only, 108 Mbps only, or Auto 108 Mbps. This is the security type you configured. 3-4 Setup and Maintenance v1.0, April 2008