Nikon 9622 D700 User's Manual - Page 216
Flash Compensation
View all Nikon 9622 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 216 highlights
Flash Compensation Flash compensation is used to alter flash output by from -3EV to +1EV in increments of 1/3EV, changing the brightness of the main subject relative to the background. Flash output can be increased to make the main subject appear brighter, or reduced to prevent unwanted highlights or reflections. Press the Y button and rotate the sub-command dial until the desired value is displayed in the control panel. In general, choose positive values to make the main subject brighter, negative values to make it darker. M button Sub-command dial At values other than ±0, a Y icon will be displayed in the control panel and viewfinder after you release the Y button. The current value for flash compensation can be confirmed by pressing the Y l button. Normal flash output can be restored by setting flash compensation to ±0.0. Flash compensation is not reset when the camera is turned off. ±0 EV (Y button pressed) -0.3 EV +1.0 EV 190