Nikon 9622 D700 User's Manual - Page 353
Aperture, setting, Sub-command dial, Change main/sub, Aperture ring, Menus, playback, Option
View all Nikon 9622 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 353 highlights
Option Description At the default setting of Sub-command dial, aperture can only be adjusted with the sub-command dial (or with the main command dial if On is selected for Change main/sub). If Aperture ring is selected, aperture can only be adjusted Aperture setting with the lens aperture ring and the camera aperture display will show aperture in increments of 1 EV (aperture for type G lenses is still set using the sub-command dial). Live view is not available when Aperture ring is selected and a CPU lens with an aperture ring is attached. Note that regardless of the setting chosen, the aperture ring must be used to adjust aperture when a non-CPU lens is attached. At the default setting of Off, the multi selector is used to choose the picture displayed during full-frame playback, highlight thumbnails, and navigate menus. If On is selected, the main command dial can be used to choose the picture displayed during full-frame playback, move the cursor left or Menus and playback right during thumbnail playback, and move the menu highlight bar up or down. The sub-command dial is used to display additional photo information in full-frame playback and to move the cursor up or down during thumbnail playback. While menus are displayed, rotating the sub- command dial right displays the sub-menu for the selected option, while rotating it left displays the previous menu. To make a selection, press 2, the center of the multi selector, or J. U 327