Nikon COOLPIX P330 Reference Manual - Page 122

The Setup Menu Option Vibration reduction Motion detection AF assist Digital zoom Sound settings Auto off Description Reduce blurring caused by camera shake when shooting. The default setting is Normal. • If a comparatively large camera shake is likely to occur when shooting from a car or under poor foothold conditions, set Vibration reduction to Active. • When using a tripod to stabilize the camera, set this feature to Off to prevent this feature from malfunctioning. • If this feature is assigned to the w (function) button using Fn button, its setting menu can be also displayed on the screen by pressing the w (function) button during shooting (A68). When the camera detects camera shake or subject movement at the time of shooting, it automatically increases ISO sensitivity and shutter speed to reduce blurring. The default setting is Off. The r indicator lights in green when the camera detects camera shake or subject movement and increases shutter speed. • When using certain shooting modes or settings, motion is not detected. In this case the r indicator is not displayed. When set to Auto (default setting), the AF-assist illuminator (A26) lights if shooting in dark surroundings to help the camera focus. • Even if Auto is selected, the AF-assist illuminator may not light depending on the position of the focus area or the scene mode that is selected. When set to On (default setting), rotating and holding the zoom control toward g (i) triggers the digital zoom (A25) if the optical zoom is at the maximum telephoto zoom position. • The digital zoom cannot be used simultaneously in certain settings such as shooting mode. Turn various camera sounds on and off. In the default setting, beep sounds are on. • The operation sound is disabled in certain settings such as shooting mode. Set the amount of time that passes before the monitor is turned off to save power. The default setting is 1 min. A E75 E76 E77 E77 E78 E78 General Camera Setup 104