Nikon COOLPIX P330 Reference Manual - Page 214
Error Messages, Additional Information
View all Nikon COOLPIX P330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 214 highlights
Additional Information Error Messages The following table lists the error messages and other warnings displayed on the monitor, as well as the solutions for dealing with them. Display O (flashes) Battery exhausted. Battery temperature is elevated. The camera will turn off. The camera will turn off to prevent overheating. Q (flashes red) Cause/Solution A Clock not set. Set date and time. E69 Charge or replace the battery. 12, 14 Battery temperature is high. Turn off camera, and allow battery to cool down before resuming use. Five seconds after this message appears, the monitor is turned off, and the power-on lamp starts flashing 19 quickly. After the lamps flash for 3 minutes, the camera turns off automatically, but you can also press the power switch to turn it off manually. Inside of the camera has become hot. The camera turns off automatically. Leave the camera off until the inside of the camera has cooled - and then turn it on again. Camera cannot focus. • Refocus. 26 • Use focus lock. 81 Please wait for the camera to finish recording. Camera cannot perform other operations until recording is complete. Wait until message clears from display automatically when recording is complete. - Memory card is write Write-protect switch of the memory card is in "lock" position. protected. Slide the write-protect switch to "write" position. - Write-protect switch of Eye-Fi card is in "lock" position. Slide the write-protect switch to "write" position. - Not available if Eye-Fi card is locked. Error accessing Eye-Fi card. • Check that the terminal is clean. 16 • Confirm that memory card is correctly inserted. 16 This card cannot be Error accessing memory card. used. • Use an approved card. 17 This card cannot be • Check that the terminal is clean. 16 read. • Confirm that memory card is correctly inserted. 16 Memory card has not been formatted for use in this camera. Card is not formatted. All data stored on the memory card is deleted when formatted. Format card? Yes If there is any data on the card that you want to keep, select No, and backup the data to a computer before formatting the 16 No memory card. To format the memory card, select Yes and press the k button. Reference Section E90