Nikon COOLPIX P330 Reference Manual - Page 209
Eye-Fi Upload, Reverse Indicators, Notes on Eye-Fi Cards, Eye-Fi Communication Indicator
View all Nikon COOLPIX P330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 209 highlights
Eye-Fi Upload Press the d button M z tab (A7) M Eye-Fi upload The Setup Menu Option Description b Enable Upload images created by the camera to a preselected (default setting) destination when an Eye-Fi card is in the camera. c Disable Images will not be uploaded. B Notes on Eye-Fi Cards • Note that images will not be uploaded if signal strength is insufficient even if Enable is selected. • Remove the Eye-Fi card from the camera in a place where the use of radio waves is prohibited. Signals may be transmitted even if Disable is selected. • Refer to the instruction manual of your Eye-Fi card for more information. In the event of malfunction, contact the card manufacturer. • The camera can be used to turn Eye-Fi cards on and off, but may not support other Eye-Fi functions. • The camera is not compatible with the endless memory function. When it is set on a computer, disable the function. If the endless memory function is enabled, the number of pictures taken may not be displayed correctly. • Eye-Fi cards are for use only in the country of purchase. Observe all local laws concerning wireless devices. • Leaving the setting as Enable will result in the battery being depleted in a shorter period of time. C Eye-Fi Communication Indicator The communication status of the Eye-Fi card in the camera can be confirmed on the monitor (A8). • w: Eye-Fi upload is set to Disable. • x (lights): Eye-Fi upload enabled; waiting to begin upload. • x (flashes): Eye-Fi upload enabled; uploading data. • z: An error occurred. The camera cannot control the Eye-Fi card. Reverse Indicators Press the d button M z tab (A7) M Reverse indicators Change the +/- display direction of the exposure indicator (A47) displayed when shooting mode is D. The + side of the indicator is up and - side is down in the default setting. Reference Section E85