Nikon COOLPIX P7800 Reference Manual - Page 182

Flash Exp. Comp., Noise Reduction Filter, Notes About Flash Exp. Comp.

Page 182 highlights

Flash Exp. Comp. Rotate the mode dial to A, B, C, D, E, F or N M d button M A, B, C or D tab (A13) M Flash exp. comp. Adjust the flash output. Use this option when the flash is too bright or too dark. Option +0.3 to +2.0 Description The flash output is increased from +0.3 to +2.0 EV, in increments of 1/3 EV, to make the main subject of the frame appear brighter. 0.0 (default setting) The flash output is not adjusted. -0.3 to -2.0 The flash output is reduced from -0.3 to -2.0 EV, in increments of 1/3 EV, to prevent unwanted highlights or reflections. B Notes About Flash Exp. Comp. When flash exposure compensation has been set on the optional flash unit the compensation values on the camera and the Speedlight are added. Noise Reduction Filter Rotate the mode dial to A, B, C, D, E, F or N M d button M A, B, C or D tab (A13) M Noise reduction filter Set the strength of the noise reduction function that is normally performed when saving images. Option Description e High Performs noise reduction at a level higher than the standard strength. M Normal (default setting) Performs noise reduction at the standard strength. l Low Performs noise reduction at a level lower than the standard strength. Reference Section E54

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270

Reference Section
E
54
Flash Exp. Comp.
Adjust the flash output.
Use this option when the flash is too bright or too dark.
B
Notes About Flash Exp. Comp.
When flash exposure compensation has been set on the optional flash unit the
compensation values on the camera and the Speedlight are added.
Noise Reduction Filter
Set the strength of the noise reduction function that is normally performed
when saving images.
Rotate the mode dial to
A
,
B
,
C
,
D
,
E
,
F
or
N
M
d
button
M
A
,
B
,
C
or
D
tab (
A
13)
M
Flash exp. comp.
Option
Description
+0.3 to +2.0
The flash output is increased from +0.3 to +2.0 EV, in
increments of 1/3 EV, to make the main subject of the frame
appear brighter.
0.0 (default setting)
The flash output is not adjusted.
-0.3 to -2.0
The flash output is reduced from –0.3 to –2.0 EV, in
increments of 1/3 EV, to prevent unwanted highlights or
reflections.
Rotate the mode dial to
A
,
B
,
C
,
D
,
E
,
F
or
N
M
d
button
M
A
,
B
,
C
or
D
tab (
A
13
)
M
Noise reduction filter
Option
Description
e
High
Performs noise reduction at a level higher than the
standard strength.
M
Normal
(default setting)
Performs noise reduction at the standard strength.
l
Low
Performs noise reduction at a level lower than the
standard strength.