Nikon COOLPIX S70 S70 User's Manual - Page 180

Troubleshooting Problem Date imprint not available Date not imprinted on pictures even when Date imprint is enabled Camera settings reset Monitor turns off, and the power-on lamp blinks green rapidly. Battery inserted into the camera is not charged when the camera is connected to a computer. Cause/Solution • Camera clock has not been set. • Another function that does not support date imprint is enabled. Date is not imprinted in the following situations: • Selected shooting mode does not support date imprint • Another function that does not support date imprint is enabled • Recording movies Backup battery is exhausted; all settings were restored to their default values. Battery temperature is high. Turn off camera and allow battery to cool down before resuming use. • The battery is not charged when the camera is turned off. • Charging stops if the computer enters sleep mode while the battery is charging. The camera may be turned off. • Depending upon computer specifications, settings, and status, it may be impossible to charge the battery inserted into the camera via computer connection. A 22, 143 76 74 75 122 144 21 131 131 131 Electronically Controlled Cameras In extremely rare instances, unusual characters may appear in the monitor and the camera may stop functioning. In most cases, this phenomenon is caused by a strong external static charge. Turn the camera off, remove and replace the battery, then turn the camera on again. In the event of continued malfunction, contact your retailer or Nikon-authorized service representative. Note that disconnecting the power source as described above may result in the loss of any data not recorded to internal memory or the memory card at the time the problem occurred. Data already recorded will not be affected. Technical Notes 168