Nikon D7100 Product Manual - Page 124
Select a preset., Select direct measurement mode., Measure white balance., Protected Presets
View all Nikon D7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
3 Select a preset. Press the L (U) button and rotate the sub-command dial until the desired white balance preset (d-1 to d-6) is displayed in the control panel. L (U) button Sub-command dial Control panel 4 Select direct measurement mode. Release the L (U) button briefly and then press the button until the L icon in the control panel starts to flash. A flashing D will also appear in the viewfinder. The displays will flash for about six seconds. Control panel Viewfinder 5 Measure white balance. r Before the indicators stop flashing, frame the reference object so that it fills the viewfinder and press the shutter-release button all the way down. The camera will measure a value for white balance and store it in the preset selected in Step 3. No photograph will be recorded; white balance can be measured accurately even when the camera is not in focus. A Protected Presets If the current preset is protected (0 103), 3 will flash in the control panel and viewfinder if you attempt to measure a new value. 96