Nikon D7100 Product Manual - Page 87
Self-Timer Mode
View all Nikon D7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Self-Timer Mode The self-timer can be used to reduce camera shake or for self-portraits. Before shooting, mount the camera on a tripod or place the camera on a stable, level surface. 1 Select self-timer mode. Press the release mode dial lock release and turn the release mode dial to E. Release mode dial 2 Frame the photograph and focus. In single-servo autofocus (0 71), photographs k can only be taken if the in-focus (I) indicator appears in the viewfinder. 3 Start the timer. Press the shutter-release button all the way down to start the timer. The self-timer lamp will start to flash. Two seconds before the photograph is taken, the self-timer lamp will stop flashing. The shutter will be released about ten seconds after the timer starts. To turn the self-timer off before a photograph is taken, turn the release mode dial to another setting. D Using the Built-in Flash Before taking a photograph with the flash in P, S, A, M, or 0 modes, press the M (Y) button to raise the flash and wait for the M indicator to be displayed in the viewfinder (0 119). Shooting will be interrupted if the flash is raised after the self-timer has started. Note that only one photograph will be taken when the flash fires, regardless of the number of exposures selected for Custom Setting c3 (Self-timer; 0 237). 59