Nikon D7100 Product Manual - Page 277

6 Compose the shot. Compose the shot and arrange the flash units as shown below. Note that the maximum distance at which the remote flash units can be placed may vary with shooting conditions. 60° or less 10 m/33 ft or less 30° or less 5 m/15 ft or less Wireless remote sensors on flash units should face camera. 30° or less 60° or less Camera (built-in flash) 5 m/15 ft or less 7 Configure the remote flash units. Turn all the remote flash units on, adjust group settings as desired, and set them to the channel selected in Step 4. See the flash unit instruction manuals for details. 8 Raise the built-in flash. Press the M (Y) button to raise the built-in flash. Note that even if - - is selected for Built-in flash > Mode, the built-in flash must be raised so that monitor preflashes will be emitted. 9 Frame the photograph, focus, and shoot. After confirming that the camera flash-ready light and the flash-ready lights for all other flash units are lit, frame the photograph, focus, and shoot. FV lock (0 125) can be used if desired. U 249