Nikon D7100 Product Manual - Page 154
Recompose the photograph., Take the photograph., Release FV lock., Flash unit, Flash mode
View all Nikon D7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
5 Recompose the photograph. 6 Take the photograph. Press the shutter-release button the rest of the way down to shoot. If desired, additional pictures can be taken without releasing FV lock. 7 Release FV lock. Press the Fn button to release FV lock. Confirm that the FV lock icon (e) is no longer displayed in the viewfinder. D Using FV Lock with the Built-in Flash FV lock is only available with the built-in flash when TTL is selected for Custom Setting e3 (Flash cntrl for built-in flash, 0 246). l A Using FV Lock with Optional Flash Units FV lock is also available with optional flash units in TTL and (where supported) monitor preflash AA and monitor pre-flash A flash control modes. Note that when commander mode is selected for Custom Setting e3 (Flash cntrl for built-in flash, 0 246), you will need to set the flash control mode for the master or at least one remote group to TTL or AA. A Metering The metering areas for FV lock when using optional flash unit are as follows: Flash unit Stand-alone flash unit Used with other flash units (Advanced Wireless Lighting) Flash mode i-TTL AA i-TTL AA A (master flash) Metered area 4-mm circle in center of frame Area metered by flash exposure meter Entire frame Area metered by flash exposure meter A See Also For information on using the depth-of-field preview or A AE-L/AF-L button for FV lock, see Custom Setting f3 (Assign preview button, 0 255) or Custom Setting f4 (Assign AE-L/AF-L button, 0 256). 126