Nikon SB27 Instruction Manual - Page 18
Test firing with the open-flash button - sb 27 ttl flash
UPC - 718122379309
View all Nikon SB27 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Test firing with the open-flash button 1 Set the flash mode selector to "M" or "AUTO". TTL A M mm ZOOM M ISO ft m 60 18 30 9 15 4 72 41 2 0.6 The ready-light comes ON when the SB-27 is ready to fire. 2 Check if the ready-light is ON and press the open-flash button to ensure that the SB-27 is firing properly. TTL A M mm ZOOM M ISO ft m 60 18 30 9 15 4 72 41 2 0.6 When battery power becomes weak, the ready-light takes longer to come ON or the power may automatically shut OFF . NOTE Pressing the open-flash button also turns ON the SB-27 after it has been turned OFF by the standby function. (See page 12.) -In this case, the flash will not fire. Press the open-flash button once more to resume normal test firing.
Test firing with the open-flash button
18
1
Set the flash mode selector to “M” or “AUTO”.
TTL
A
M
M
ZOOM
ISO
mm
ft
m
60
30
15
7
4
2
18
9
4
2
1
0.6
The ready-light comes ON when the SB-27 is ready to fire.
2
Check if the ready-light is ON and press the open-flash
button to ensure that the SB-27 is firing properly.
TTL
A
M
M
ZOOM
ISO
mm
ft
m
60
30
15
7
4
2
18
9
4
2
1
0.6
When battery power becomes weak, the ready-light takes
longer to come ON or the power may automatically shut OFF .
NOTE
Pressing the open-flash button also turns ON the SB-27 after it
has been turned OFF by the standby function. (See page 12.)
—In this case, the flash will not fire. Press the open-flash button once
more to resume normal test firing.