Nikon SB27 Instruction Manual - Page 24
Flash operation in AUTO mode
UPC - 718122379309
View all Nikon SB27 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Flash operation in AUTO mode (Cameras in Procedures 1 Lens in use D- or G-type Nikkor lenses • With a G-type Nikkor lens attached to F90X/N90s, F90-Series/N90 or F70-Series/N70 cameras, the A and M exposure modes cannot be used. 2 Available flash operation*1 Camera settings 3 Metering system*2 3D Multi-Sensor*3 Balanced Fill-Flash tØ*4 Standard TTL Flash t Desired metering system • Nikkor lenses with built-in CPU except D/G-type and AF Nikkor lenses for the F3AF camera • AI-P-type Nikkor lenses Nikkor lenses*5 without built-in CPU Multi-Sensor*3 Balanced Fill-Flash tØ*4 Standard TTL Flash t Center-Weighted/ Spot Fill-Flash tø (except F80-Series/ N80-Series cameras) Standard TTL Flash t Desired metering system CenterWeighted/Spot Metering *1 Press the "M" button to change the SB-27's flash mode indicator. *2 If the F5, F100, or F80-Series/N80-Series is set to Spot Metering, flash operation is automatically set to Standard TTL Flash. *3 3D Multi-Sensor Balanced Fill-Flash and Multi-Sensor Balanced Fill-Flash are generally referred to as Automatic Balanced Fill-Flash with TTL Multi Sensor. *4 When Ø appears on the LCD panel, Monitor Preflash is possible. *5 With a non-CPU lens attached to the F80-Series/N80-Series camera, set the exposure mode to Manual only. The camera's exposure meter cannot be used. Set and confirm the aperture using the lens aperture ring.