Nikon SB27 Instruction Manual - Page 38
Cameras in Group VII
![]() |
UPC - 718122379309
View all Nikon SB27 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Flash operation in AUTO mode (Cameras in Group VII: With cameras in Group VII, be sure to set the camera setting switch (inside the SB-27's battery chamber) to ˚, and choose "AUTO" (in the flash mode selector); the flash mode is automatically set to Non-TTL Auto Flash. -In non-TTL Auto Flash mode, flash mode indicator ˙ appears in the SB-27's LCD panel. Procedures 1 Lens in use 2 Available flash operation Nikkor lenses with built-in CPU* Nikkor lenses without built-in CPU Non-TTL Auto Flash ˙ *G-type Nikkor lenses cannot be used. NOTE • Set the lens to the same aperture value as in the SB-27 to obtain a correct exposure. • A usable aperture value appears in the SB-27's LCD panel whenever you press the "F" button.
![](/manual_guide/products/nikon-sb-27-instruction-manual-37f2c9f/38.png)
38
With cameras in Group VII, be sure to set the camera setting
switch (inside the SB-27's battery chamber) to
˚
, and
choose “AUTO” (in the flash mode selector); the flash mode
is automatically set to Non-TTL Auto Flash.
—In non-TTL Auto Flash mode, flash mode indicator
˙
appears in the
SB-27's LCD panel.
Procedures
Nikkor lenses with built-in CPU*
Nikkor lenses without built-in CPU
Non-TTL Auto
Flash
˙
Available flash
operation
Lens in use
1
2
Flash operation in AUTO mode
(Cameras in Group VII:
NOTE
•
Set the lens to the same aperture value as in the SB-27 to obtain
a correct exposure.
•
A usable aperture value appears in the SB-27's LCD panel
whenever you press the “F” button.
*G-type Nikkor lenses cannot be used.