Nikon SB27 Instruction Manual - Page 52
Set up the built-in bounce flash adapter., Confirm that the ready-light is ON, then release the,
UPC - 718122379309
View all Nikon SB27 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Bounce flash operation (Applicable to all camera groups) 4 Set up the built-in bounce flash adapter. 2 1 Pull out the bounce flash adapter ➀, then raise it approx. 45° ➁. (The bounce flash indicator appears in the LCD panel.) -Do not force the bounce flash adapter. 5 Confirm that the ready-light is ON, then release the shutter to fire the flash. TTL A M ISO ft m 60 18 30 9 15 4 72 41 2 0.6 If the ready-light blinks for 3 seconds after shooting, reconfirm the flash shooting distance range or select a wider aperture, and then reshoot. -In bounce flash operation, no indicator bars appear in the LCD panel. (The SB-27 no longer indicates the correct relationship between aperture and flash shooting distance range.)
52
Bounce flash operation
(Applicable to all camera groups)
4
Set up the built-in bounce flash adapter.
2
1
Pull out the bounce flash adapter
, then raise it approx. 45°
.
(The bounce flash indicator
appears in the LCD panel.)
—Do not force the bounce flash adapter.
5
Confirm that the ready-light is ON, then release the
shutter to fire the flash.
TTL
A
M
ISO
ft
m
60
30
15
7
4
2
18
9
4
2
1
0.6
If the ready-light blinks for 3 seconds after shooting, reconfirm
the flash shooting distance range or select a wider aperture,
and then reshoot.
—In bounce flash operation, no indicator bars appear in the LCD
panel. (The SB-27 no longer indicates the correct relationship
between aperture and flash shooting distance range.)