Nikon SB27 Instruction Manual - Page 44

Flash operation in Manual (M) mode (For cameras Other camera/lens combinations TTL A M mm ZOOM M ISO ft m 60 18 30 9 15 4 72 41 2 0.6 1) While looking at the indicator bar "¡", press the "F" button to change the aperture and bring the subject within flash shooting distance range. Next, read the aperture value. 2) Set the corresponding value on the lens aperture ring or on the camera. NOTE Manual light output control and aperture selection: • To extend the flash shooting distance range, select the 1/1 light output setting or set the lens to a larger aperture (lower f-number). To reduce the flash shooting distance range, select the 1/16 light output setting or set the lens to a smaller aperture (higher fnumber). • To ensure sharpness in both background and foreground, set the lens to a smaller aperture (higher f-number), and select a larger light output setting (closer to 1/1). • To shorten flash recycling time, select a much smaller light output setting (closer to 1/16) and set a larger aperture (lower f-number). 5 Confirm that the ready-light is ON, then fully depress the shutter release button to fire the flash. TTL A M mm ZOOM M ISO ft m 60 18 30 9 15 4 72 41 2 0.6