Nikon SB27 Instruction Manual - Page 56
Cameras in Groups
UPC - 718122379309
View all Nikon SB27 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Close-up flash operation in AUTO mode (Cameras in Groups I Procedures (with the SB-27 mounted on the camera) 1 Set the camera's exposure mode to aperture-priority auto (A) or manual (M). -For cameras in Group I to VI, in addition to selecting Aperture Priority or Manual, the Close Up Program within the Vari-Programs can also be used. 2 Set the SB-27's flash mode selector to "AUTO". TTL A M mm ZOOM M ISO ft m 60 18 30 9 15 4 72 41 2 0.6 3 Pull out the built-in bounce flash adapter. Pull out the bounce flash adapter all the way and tilt it downward approx. 45°. (The bounce flash indicator in the LCD panel.) -Do not force the bounce flash adapter. appears NOTE If the bounce flash adapter comes off and you cannot set the zoom-head position corresponding to the lens in use. Simultaneously press the "ZOOM" and "F" buttons for approx. 4 seconds. The zoom-head position indicator then blinks, and you can proceed with automatic or manual zoom-head setting. Four stops (24mm, 28mm, 35mm and 50mm) are available with the flash-head in the horizontal position, and 3 stops (35mm, 50mm and 70mm) with the flash-head in the vertical position, depending on the camera/lens combination. (See page 20.)