Nikon SB27 Instruction Manual - Page 76
Troubleshooting
![]() |
UPC - 718122379309
View all Nikon SB27 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Troubleshooting Warning indicator Cause Action to be taken Ref. page No J indicator appears. ŋ Batteries are not ŋ Re-install batteries correctly installed. with correct "+" and "-" directions. ŋ Battery power is weak. ŋ Install new batteries. ŋ Battery contacts inside ŋ Clean the battery the battery chamber are contacts. contaminated. P. 11 Power turns OFF. ŋBattery power is ŋ Replace the batteries P. 11, 18 exhausted. with fresh ones. ŋCamera setting switch ŋ Set the camera setting P. 13 is set to K for switch to ˚. cameras in Group VII. No indicator bars appear. ŋ Built-in bounce flash adapter is used for bounce flash operation or not correctly set into place. ŋ Fold the diffuser card back into the unit. P. 52 M above the ŋ Auto zoom-head ZOOM blinks. positioning is (for cameras in canceled. Group I and II) ŋ Resume auto zoomhead positioning. P. 20 No Ø indicator lights up (for cameras in Group I) ŋ A lens other than a Nikkor lens with built- in CPU is mounted. ŋ Flash mode is set to Standard TTL Flash. ŋ Mount a Nikkor lens with built-in CPU. ŋ Press the "M" button until the flash mode indicator Ø appears. P. 24 P. 24 ÷ indicator ŋ Flash has fired at full blinks and expo- output but the light sure compensa- may have been tion value lights insufficient. up (for cameras in Group I). ŋ Reconfirm the flash shooting distance range, move closer to the subject, or select a wider aperture, and then reshoot. P. 40 f blinks ŋ Lens aperture is not ŋ Set the lens aperture set to its minimum (highest f-number). to its minimum, or set the exposure mode to N/A A or M.
![](/manual_guide/products/nikon-sb-27-instruction-manual-37f2c9f/76.png)