Nikon SB27 Instruction Manual - Page 43
cameras in all groups
![]() |
UPC - 718122379309
View all Nikon SB27 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
cameras in all groups) 3 Press the "M" button to choose the desired light output. TTL A M mm ZOOM M ISO ft m 60 18 30 9 15 4 72 41 2 0.6 You can select light output settings ranging from full power (1/1) to one-sixteenth (1/16). LCD indicators change as follows: 1/1 → 1/2 → 1/4 → 1/8 → 1/16. 4 Setting the aperture on both the SB-27 and the camera Cameras in Groups I and II with Nikkor lenses with built-in CPU TTL A M mm ZOOM M ISO ft m 60 18 30 9 15 4 72 41 2 0.6 Rotate the camera's command dial or lens aperture dial; the indicator bar "¡" in the LCD panel changes. Before shooting, make sure your subject is within flash shooting distance range. • Aperture value can be set by rotating the sub-command dial (F5 only).
![](/manual_guide/products/nikon-sb-27-instruction-manual-37f2c9f/43.png)
43
cameras in all groups)
3
Press the “M” button to choose the desired light output.
TTL
A
M
M
ZOOM
ISO
mm
ft
m
60
30
15
7
4
2
18
9
4
2
1
0.6
You can select light output settings ranging from full power (1/1)
to one-sixteenth (1/16). LCD indicators change as follows:
1/1
→
1/2
→
1/4
→
1/8
→
1/16.
4
Setting the aperture on both the SB-27 and the camera
Rotate the camera's command dial or lens aperture dial; the
indicator bar “
¡
” in the LCD panel changes. Before shooting,
make sure your subject is within flash shooting distance
range.
• Aperture value can be set by rotating the sub-command dial
(F5 only).
Cameras in Groups I and II with Nikkor lenses with built-in CPU
TTL
A
M
M
ZOOM
ISO
mm
ft
m
60
30
15
7
4
2
18
9
4
2
1
0.6