Nokia 100i Installation Guide - Page 29

Pin Assignments, for Console and AUX Connections, To connect to the console

Get Nokia 100i - IP VPN - Gateway PDF manuals and user guides View all Nokia 100i manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

Performing the Initial Hardware Configuration To connect to the console 1. Turn off power to the gateway. 2. Connect the supplied null-modem cable (console cable) to the console port. Note On the Nokia 100i gateway the console port is located on the front of the gateway. Use only the DB-9 port labeled Console; the serial port AUX is an auxiliary modem port. If you connect the console port to a data-communications equipment device, use a straight-through cable. For cable pin assignments for the console connection, "Pin Assignments for Console and AUX Connections" on page 30. 3. Connect the other end of the cable to a system running a terminal-emulation program. 4. If you are using a flash memory card, insert the flash memory card into the primary flash memory card slot. The Nokia 100i has slots in the front panel for flash cards. Note Nokia recommends that you use the embedded flash memory on the gateway instead of using the flash memory card. All gateway models have internal flash memory. a. Align the card with the slot so that the connector is inserted first. b. Gently slide the card into the slot and press until you feel it seat into the slot. If the card does not insert all the way, flip it over and reinsert it. Nokia 100i Installation Guide 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
Performing the Initial Hardware Configuration
Nokia 100i Installation Guide
29
To connect to the console
1.
Turn off power to the gateway.
2.
Connect the supplied null-modem cable (console cable) to the console
port.
Note
On the Nokia 100i gateway the console port is located on the front of
the gateway.
Use only the DB-9 port labeled Console; the serial port AUX is an
auxiliary modem port.
If you connect the console port to a data-communications equipment
device, use a straight-through cable.
For cable pin assignments for the console connection,
“Pin Assignments
for Console and AUX Connections”
on page 30.
3.
Connect the other end of the cable to a system running a
terminal-emulation program.
4.
If you are using a flash memory card, insert the flash memory card into
the primary flash memory card slot.
The Nokia 100i has slots in the front panel for flash cards.
Note
Nokia recommends that you use the embedded flash memory on the
gateway instead of using the flash memory card. All gateway models
have internal flash memory.
a.
Align the card with the slot so that the connector is inserted first.
b.
Gently slide the card into the slot and press until you feel it seat into
the slot. If the card does not insert all the way, flip it over and
reinsert it.