Nokia 100i Installation Guide - Page 31

Connecting Power and Turning the Power On, Table 3,

Get Nokia 100i - IP VPN - Gateway PDF manuals and user guides View all Nokia 100i manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

Performing the Initial Hardware Configuration Table 3 on page 31 shows how to match pins at the console or serial connector with output pins on DB9 or DB25 cables you are using with terminal devices or other appropriate equipment. Table 3 Pin Assignments for DB9 and DB25 Interface Cables Console or serial DB9 cable-output pin and DB25 cable-output pin and pin and assignment assignment assignment Shield (FG) Shield (FG) 1 (FG) 2 (RXD) 3 (TXD) 2 (TXD) 3 (TXD) 2 (RXD) 3 (RXD) 4 (DTR) 6 (DSR) 6 (DSR) 5 (SG) 5 (SG) 7 (SG) 6 (DSR) 4 (DTR) 20 (DTR) 7 (RTS) 8 (CTS) 5 (CTS) 8 (CTS) 7 (RTS) 4 (RTS) Connecting Power and Turning the Power On The power switch and receptacle for the power cord are located on the back of the gateway, as shown in Figure 6. The gateway power supply automatically detects the input voltage (120 VAC [100 to 130] or 240 VAC [200 to 264]) and configures itself appropriately. Nokia 100i Installation Guide 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
Performing the Initial Hardware Configuration
Nokia 100i Installation Guide
31
Table 3
on page 31 shows how to match pins at the console or serial connector
with output pins on DB9 or DB25 cables you are using with terminal devices
or other appropriate equipment.
Connecting Power and Turning the Power On
The power switch and receptacle for the power cord are located on the back of
the gateway, as shown in
Figure 6
.
The gateway power supply automatically detects the input voltage (120 VAC
[100 to 130] or 240 VAC [200 to 264]) and configures itself appropriately.
Table 3
Pin Assignments for DB9 and DB25 Interface Cables
Console or serial
pin and assignment
DB9 cable-output pin and
assignment
DB25 cable-output pin and
assignment
Shield (FG)
Shield (FG)
1 (FG)
2 (RXD)
3 (TXD)
2 (TXD)
3 (TXD)
2 (RXD)
3 (RXD)
4 (DTR)
6 (DSR)
6 (DSR)
5 (SG)
5 (SG)
7 (SG)
6 (DSR)
4 (DTR)
20 (DTR)
7 (RTS)
8 (CTS)
5 (CTS)
8 (CTS)
7 (RTS)
4 (RTS)