Nokia 100i Installation Guide - Page 42
Installing an Encryption Accelerator Card
View all Nokia 100i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
4 Installing and Replacing Optional Cards Installing an Encryption Accelerator Card This section describes how to replace the Nokia Encryption Accelerator Card. The card is included with the Nokia 100i gateway and installed before the gateway is delivered to you. These instructions apply only if you are replacing the card. The Nokia Encryption Accelerator Card provides high-speed cryptographic processing that enhances the performance of VPN tunnels. By taking over cryptographic processing, the card allows the gateway CPU to perform other tasks. The Nokia Encryption Accelerator Card is in a PMC format for the Nokia 100i. This card has no external cable connection ports and requires no cables. The following security algorithms are supported: ! MD5 and SHA-1 authentication ! DES and 3DES encryption ! 128-bit, 192-bit, and 256-bit AES encryption To install the Nokia Encryption Accelerator Card on the Nokia 100i 1. Turn off the power switch on the rear of the gateway and unplug the power cord. Note If you cannot access the power switch, you can still perform this procedure. When the slide tray assembly is removed from the chassis assembly, power to a Nokia 100i is automatically disconnected. 42 Nokia 100i Installation Guide