Nokia 100i Installation Guide - Page 30

Console Pin Assignments, Connecting the Console Port, Connecting Power and Turning the Power

Get Nokia 100i - IP VPN - Gateway PDF manuals and user guides View all Nokia 100i manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

3 Performing the Initial Configuration 5. Make sure that you have a terminal emulator configured with the settings described in "Connecting the Console Port" on page 28. 6. Turn on power to the gateway. Continue to "Connecting Power and Turning the Power On" on page 31. Console Pin Assignments Use the built-in console port to supply the information that makes the gateway available on the network. Use the built-in serial port (AUX) for RS232compliant equipment you are using with your gateway; for example, as a modem connection for managing the gateway. Figure 5 on page 30 provides pin assignment information for console and serial connections. Figure 5 Pin Assignments for Console and AUX Connections Input or 1 5 Pin # Assignment output 1 6 9 00460 DCD (AUX port only; not used by the console port) Input 2 RXD Input 3 TXD Output 4 DTR Output 5 GND 6 DSR Input 7 RTS Output 8 CTS Input 9 not used 30 Nokia 100i Installation Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
3
Performing the Initial Configuration
30
Nokia 100i Installation Guide
5.
Make sure that you have a terminal emulator configured with the settings
described in
“Connecting the Console Port”
on page 28.
6.
Turn on power to the gateway.
Continue to
“Connecting Power and Turning the Power On”
on page 31.
Console Pin Assignments
Use the built-in console port to supply the information that makes the gateway
available on the network. Use the built-in serial port (AUX) for RS232-
compliant equipment you are using with your gateway; for example, as a
modem connection for managing the gateway.
Figure 5
on page 30 provides
pin assignment information for console and serial connections.
Figure 5
Pin Assignments for Console and AUX Connections
00460
6
9
5
1
Pin #
Assignment
Input or
output
1
DCD
(AUX port
only; not used
by the console
port)
Input
2
RXD
Input
3
TXD
Output
4
DTR
Output
5
GND
6
DSR
Input
7
RTS
Output
8
CTS
Input
9
not used