Nokia 6212 classic Nokia 6212 classic User Guide in English - Page 13

Charge the battery

Page 13 highlights

4. Close the SIM card holder, and pull it until it locks into place (7). Insert the memory card and battery 1. To insert the memory card, press it into the slot until it locks into place (1). 2. Ensure the card is properly inserted with the gold-coloured contact area on the card facing down (2). 3. Observe the battery contacts and insert the battery (3-4). 4. Replace the back cover (5-6). ■ Charge the battery Always switch the device off and disconnect the charger before removing the battery. Charging the BL-4U battery with the AC-8 charger takes approximately 1 hour 30 minutes while the phone is in the standby mode. 1. Connect the charger to a wall socket. 2. Connect the lead from the charger to the charger connector at the bottom of your phone. If the battery is completely discharged, it may take several minutes before the charging indicator appears on the display or before any calls can be made. Get started 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58

13
Get started
4.
Close the SIM card holder, and pull it until it locks into place (7).
Insert the memory card and battery
1.
To insert the memory card, press it into the slot until it locks into place (1).
2.
Ensure the card is properly inserted with the gold-coloured contact area on the
card facing down (2).
3.
Observe the battery contacts and insert the battery (3-4).
4.
Replace the back cover (5-6).
Charge the battery
Always switch the device off and disconnect the charger before removing the battery.
Charging the BL-4U battery with the AC-8 charger takes approximately 1 hour 30
minutes while the phone is in the standby mode.
1.
Connect the charger to a wall socket.
2.
Connect the lead from the charger to the charger
connector at the bottom of your phone.
If the battery is completely discharged, it may take
several minutes before the charging indicator appears
on the display or before any calls can be made.